Services PG&E About Service Areas
🇲🇽 ES (408) 849-6200 david@apexbore.com
Vermeer directional drill set up on a San Jose front lawn for a residential bore
Residential Service

RESIDENTIAL
HDD BORING

We bore under your driveway, walkways, retaining walls, and landscaping to install gas, water, electric, and sewer lines without trenching across your yard. We dig only small entry and exit pits, then put them back the way we found them.

No Open Trench Across Your Yard
CSLB #838568 · A, B, HAZ
Vermeer D20x22 S3
PG&E OQ Certified
★ 5.0 on Google
What We Drill
RESIDENTIAL HDD SERVICES

From single-family homes to multi-unit properties — we bore under driveways, patios, retaining walls, and landscaping without disturbing your property.

Residential Bores

Gas, water, electric, and sewer service laterals installed under driveways, sidewalks, and landscaping — no trenching through your yard.

Single-Family & Multi-Unit

Driveway & Patio Crossings

Bore under concrete driveways, pavers, patios, and walkways to install utilities without any demolition or surface damage.

No Concrete Demo

Street & Sidewalk Crossings

Bore under existing pavement, curb, and gutter without cutting. Cleaner, faster, and often required by city permit.

No-Cut Permitted

Multiple Utility Bores

We can pull gas, electric conduit, and water in a single bore path or staged bores — reducing total site disruption and mobilization costs.

Bundled Service Available

Tight-Access Sites

Our compact Vermeer D20x22 S3 rig can work in narrow side yards, tight urban lots, and space-constrained commercial sites.

Compact Rig Available

Permit & Inspection Ready

We work with your GC or directly with the city. We understand permit requirements, inspection hold points, and documentation needs.

GC & Owner-Direct
How It Works
THE HDD PROCESS

Horizontal directional drilling is a trenchless method that installs pipe or conduit underground with minimal surface impact.

01

Site Walkthrough

We review the bore path, utility marks, surface conditions, and access points before any equipment is staged.

02

Pilot Bore

A small-diameter drill head is steered underground along a guided path from entry to exit using locating equipment.

03

Reaming & Pullback

The bore hole is enlarged to the required diameter, then pipe or conduit is pulled back through in a single pass.

04

Restoration

Entry and exit pits are backfilled and compacted. Surface is restored to match existing conditions.

Why Apex
THE APEX ADVANTAGE

Licensed, Bonded & Insured

CSLB #838568 — A (General Engineering), B (General Building), and HAZ (hazardous substance removal, so an old buried tank or contaminated soil doesn’t stall your job). PG&E OQ Certified. General liability, workers’ comp, and auto coverage on every job.

2023 Vermeer D20x22 S3

New equipment means reliable performance and less downtime. Our rig handles 2"–6" product pipe in most soil conditions.

HDPE Fusion In-House

Butt and electrofusion capability — no subcontractors needed for pipe joining on HDPE installations.

Bay Area Expertise

We know local soil conditions, city permit requirements, and PG&E coordination in the South Bay and beyond.

Fast Mobilization

Based in Santa Clara, minutes from Los Gatos, Saratoga, Cupertino, and San Jose. We quote, permit, and mobilize quickly — no waiting on out-of-area crews.

Clean Jobsites

We take pride in how we leave a job. Spoils removed, surfaces restored, and no mess left behind.

Project Gallery
RECENT RESIDENTIAL BORES

Real jobs from Los Gatos, Saratoga, Monte Sereno, and San Jose — bores under raised homes, driveways, oak-lined roads, and finished landscaping. Tap any photo to enlarge.

Crew boring utilities beneath a raised house in Los Gatos with the drill staged under the floor framing
Los GatosCrew boring utilities beneath a raised house in Los Gatos with the drill staged under the floor framing
Residential bore setup in a San Jose driveway
San JoseResidential bore setup in a San Jose driveway
Ditch Witch directional drill set up on a Los Gatos street for a residential bore
Los GatosDitch Witch directional drill set up on a Los Gatos street for a residential bore
Drill rig working down an oak-lined private road in Saratoga
SaratogaDrill rig working down an oak-lined private road in Saratoga
Backreamer pulled into the exit pit on a Los Gatos hillside bore
Los GatosBackreamer pulled into the exit pit on a Los Gatos hillside bore
Electrical conduit pulled back through the bore into the receiving pit, Los Gatos
Los GatosElectrical conduit pulled back through the bore into the receiving pit, Los Gatos
HDD rig and drill rods staged on a Monte Sereno residential job
Monte SerenoHDD rig and drill rods staged on a Monte Sereno residential job
Directional drill boring along a fence line in San Jose
San JoseDirectional drill boring along a fence line in San Jose
Apex crew member in a taped-off bore exit pit, Los Gatos
Los GatosApex crew member in a taped-off bore exit pit, Los Gatos
Hand-dug bore pit in a Saratoga front yard
SaratogaHand-dug bore pit in a Saratoga front yard
Compact HDD rig staged beneath a home lifted on cribbing in Los Gatos
Los GatosCompact HDD rig staged beneath a home lifted on cribbing in Los Gatos
New electric meter panel with underground conduits, Monte Sereno
Monte SerenoNew electric meter panel with underground conduits, Monte Sereno

See all project photos →

Typical Pricing
WHAT A RESIDENTIAL BORE COSTS

Every site is different, but here’s where most Bay Area residential jobs land. Your estimate is free and itemized.

Private side only$14K–$18K

About 30–60 ft through a yard or under a driveway. No street work.

PG&E service, private side$18K–$30K

Trench or bore from the street to the meter, with restoration.

Street crossing$40K+

Street trench or bore with traffic control, plates, and sidewalk and asphalt restoration.

Read the full residential boring cost guide →

Where We Work
RESIDENTIAL HDD NEAR YOU

Based in Santa Clara. Most of our residential work is in the West Valley and South Bay, with regular jobs in the Tri-Valley and Lamorinda.

Los GatosSaratogaMonte SerenoCupertinoSan JoseWillow GlenCampbellSanta ClaraLos AltosPalo AltoDanvillePleasantonAlamoLafayetteBlackhawk
Google Reviews
WHAT HOMEOWNERS SAY
★★★★★ 5.0 on Google — read every review →
★★★★★

“Very tight quarters to do the boring and it was no problem for Dave. Work site was back to its original condition before they left for the day.”

Gary G.Residential bore
★★★★★

“He was careful to minimize the damage to the patio and set aside the removed pavers in a neat stack… helped me navigate the process with PG&E.”

Stephen L.Gas meter & panel relocation
★★★★★

“Able to start on the job immediately… and dig underneath a retaining wall without damaging it. He has a deep understanding of the PG&E Greenbook.”

Steven M.PG&E electrical upgrade

All reviews →

Common Questions
RESIDENTIAL HDD FAQ
How much does a residential bore cost?

It depends on length, soil, and whether the work crosses the street. As a rough guide: a private-side bore of about 30–60 ft through a yard or under a driveway typically runs $14,000–$18,000; a PG&E gas or electric service from the street to your meter with restoration is usually $18,000–$30,000; jobs that need a street crossing, traffic control, and asphalt or sidewalk restoration start around $40,000. See our residential boring cost guide for details, then call for an exact quote.

Will my yard or driveway get torn up?

No open trench runs across your yard. We dig a small entry pit and exit pit (usually a few feet square), steer the bore underneath your driveway, patio, or landscaping, then backfill, compact, and restore the pits. If a pit has to go through pavers or hardscape, we set the material aside and put it back.

How long does it take?

A single-utility residential bore is often done in one day. Longer runs, multiple utilities, or PG&E inspection hold points can add days. We give you a realistic schedule before we mobilize.

Do you handle permits and PG&E?

Yes. We’re PG&E OQ Certified and work from PG&E Greenbook requirements and construction sketches every week. We coordinate city encroachment permits, inspections, and PG&E paperwork, and we work directly with homeowners or with your general contractor.

What happens if you hit rock or an obstruction?

We call USA North 811 and pothole known utilities before drilling. If we hit rock or something unexpected, we stop and talk you through the options — a re-route, different tooling, or a short open-trench section — before anything changes on your bill.

Can you run more than one utility at once?

Often, yes. Gas, electric conduit, water, and low-voltage lines can frequently be installed in a single bore path or in staged bores on the same mobilization, which cuts down on cost and disruption. ADU utility packages are a common example.

Which cities do you serve?

We’re based in Santa Clara and work throughout the South Bay and Peninsula — Los Gatos, Saratoga, Monte Sereno, Cupertino, San Jose (including Willow Glen), Campbell, Santa Clara, Los Altos, and Palo Alto — plus the Tri-Valley and Lamorinda: Danville, Pleasanton, Alamo, Lafayette, and Blackhawk.

NEED A RESIDENTIAL BORE QUOTE?

Tell us the utility type, rough bore length, and your city — we’ll turn around a free estimate. A single-utility residential bore is often finished in one day; we’ll give you a realistic schedule before we mobilize.